Rossi Cold Fusion Validated by Swedish Skeptic's Society
Yet another test of Andrea Rossi's Energy Catalyzer (E-Cat) has
been performed on a 4.5 kW version near the University of Bologna. This
time a new set of observers were present, one of which is the chairman
of the Swedish Skeptics Society, who confirmed that Copper is being
formed from Hydrogen and Nickel -- cold fusion!

Andrea Rossi grasps one of his new
E-Cat units that offer a more compact size and higher power
density.
|
by Hank
Mills
Pure Energy Systems News
The evidence in support of Andrea Rossi's "cold fusion" or "LENR" (low
energy nuclear reaction) based Energy Catalyzer continues to grow. For
those who are not aware, his system combines nickel powder, hydrogen
gas, and an input of pressure and heat to produce a large output of
thermal energy. On March 29th, 2011 yet another test of the technology
was performed at the University of Bologna. Like previous tests, the
outcome was a complete success. However, this time a smaller version of
the E-Cat was tested and two new observers were present.
Some well known players were present during the test. These include
Andrea Rossi (the inventor of the E-Cat), Professor Sergio Focardi, Dr.
David Bianchini, and of course Dr. Giuseppe Levi. Two guest observers
were also present. One of the guest observers was Hanno Essen, associate
professor of theoretical physics at the Swedish Royal Institute of
Technology. He is also the chairman of the Swedish Skeptics Society. The
other guest observer was Professor Sven Kullander of Uppsala University.
He is also chairman of the Royal Swedish Academy of Sciences Energy
Committee.
Smaller System with Great Results
The test was performed on a much smaller version of the E-Cat. The
previous version of the E-Cat had a reactor volume of about one liter.
This system has a reactor volume of only one twentieth of a liter. Four
E-Cat systems were present, but only one was tested. The remaining units
had their shielding and insulation removed. This allowed for their
construction to be seen.
This new model of E-Cat consists of a stainless steel reactor vessel
which is placed inside of a copper pipe. Water flows between the copper
pipe and the steel reactor vessel. There are inlets for both water and
hydrogen gas. The reactor is activated by current flowing through a
resistor which is wrapped around the outside of the copper pipe. When a
certain temperature is reached the reaction begins. The setup is truly
simple. It reminds me of old pipework from many years ago.
Kullander and Essen were given permission to examine the setup, check
for hidden power supplies, fill the reactor with hydrogen, calibrate the
volume of water flow, monitor the temperature of the water flow in and
out of the system, and observe the entire experiment. The reactor
contained 50 grams of nickel powder and .11 grams of hydrogen. In their
report (pdf) they state, "We had free access to the heater electric
supply, to the inlet water hose, to the outlet steam valve and water
hose, and to the hydrogen gas feed pipe. The total weight of the device
was estimated to be around 4 kg."
The result of the experiment was a constant average production of 4.69
kW of power for almost six hours. Additionally, the input was on average
330 watts (30 of which was used by the electronics controlling the
setup). This is fifteen times less than the energy produced by the
device (15x overunity).
This output was less than the 10 to 15 kW produced by the previous
version of the E-Cat, but this is very impressive for a device 1/20th
the volume!
Kullander and Essen also ruled out that the energy could be coming from
a chemical source. They stated, "Any chemical process for producing 25
kWh from any fuel in a 50 cm3 container can be ruled out. The only
alternative explanation is that there is some kind of a nuclear process
that gives rise to the measured energy production." This statement is
VERY significant coming from a report written not only by professional
scientists, but also by the chairman of a skeptical society!
Yet again, it seems the existence of cold fusion or LENR in the form of
Andrea Rossi's Energy Catalyzer has been vindicated. However, there is
more news to report.
Transmutations
It is well known to those who have been following the saga of Andrea
Rossi's technology that one byproduct of the system is copper.
Apparently, it is the result of the fusion reaction between nickel and
hydrogen. Until now, we had to take Andrea Rossi's word for that, but
the results of additional testing has confirmed his claims.
A sample of fresh nickel powder and a sample of nickel powder that had
been in an active E-Cat for two and a half months was given to Kullander
and Essen. Elemental and isotopic analysis was performed on the samples
utilizing both X-ray Fluorescence and Inductively Coupled Plasma Mass
Spectrometry. The result was that the fresh nickel powder was almost
totally pure nickel, but the nickel powder that had been in an E-Cat
contained 10% copper and 11% iron. Two of the copper isotopes detected
were Cu63 and Cu65. Kullander has stated this is proof of nuclear
reactions taking place in the reactor.
Put that in your pipe and smoke it,
Bob Park!
Mr. Park, are you ready to start apologizing for your many years of
claiming cold fusion is simply pseudo-science, voodoo science, and snake
oil? You better crawl back into the hole you came out of, because a lot
of folks are going to be demanding apologies soon!
(Go ahead and continue faking your, "cold fusion amnesia." We realize
you have been avoiding talking about the topic over the past few
months!)
Dumbstream Media Still Not Paying Attention
After multiple successful tests of the E-Cat by third parties, and now
proof of nuclear reactions, it is frustrating (but predictable) that the
mainstream media is not paying hardly any attention to this technology.
The E-Cat represents a way to eliminate our need for fossil fuels and an
alternative to conventional nuclear power. However, Fox News, CNN,
MSNBC, and many other news networks act as if nothing is happening.
This is more proof that the mainstream media is dead, totally owned and
controlled by the corrupt powers that be. If you want up to date news
and information the alternative media is now the best source. At some
point, awareness of this technology will reach a critical mass, and the
so called mainstream media will be forced to cover it. Probably, there
will be multi-hour long televised specials about the technology. The
truth, of course, will be that they will not deserve the ratings they
get. They ignored this technology for many months and it would serve
them right if no one tuned in! I hope Andrea Rossi does not give a
single major network in the United States an interview. My personal hope
is that he chooses to give frequent interviews on Coast to Coast AM, and
other media outlets that have frequently favorably discussed cold fusion
over the years.
Energy Revolution Coming Soon
This is further evidence that an energy revolution is coming. As the
year long research program on the E-Cat technology continues at the
University of Bologna, more evidence is bound to be released. Perhaps
soon after the one megawatt power plant and 300,000 unit a year
manufacturing plant in Xanthi, Greece opens, a factory can start up in
Japan. They could sure use a source of jobs and a new source of energy
to replace their destroyed conventional nuclear power industry.
The only real mystery at this point is the catalyst(s) used in the
reaction. This is the key to producing practical levels of output from
nickel-hydrogen fusion systems.
# # #
This story is also published at
BeforeItsNews.
Links:
PESN.com
Copyright © 2002-2010,
PES Network Inc.
|