New System Lowers Costs Of Seawater DesalinationOctober 29, 2012
In early 2013 the Frankenthal-based pump and valve manufacturer
KSB will launch its new compact unit for reverse osmosis seawater
desalination. The Three functions are fulfilled by one and the same unit: creating
high pressure, compensating pressure losses and recovering energy.
There is no need for a separate booster pump. The entire system runs
on a single electric motor and frequency inverter. Compared to conventional energy recovery systems with pressure
exchangers or Pelton turbines, this design saves up to 50 % in
energy costs. The Fluctuating salt contents in the seawater to be processed can be
responded to by means of the integrated control system. In recent
tests the new compact unit desalinated one cubic metre of seawater
with a salt content of 35,000 ppm at a power input of approximately
two kilowatts per hour. As no piping is required between the individual components, the
new system takes up minimal space, which makes it ideal for use in
mobile container units. KSB is the first manufacturer to supply this
type of compact system for the RO process. Field tests have been
underway at various Middle Eastern sites since October 2012. RO systems have become well established in seawater desalination
and will continue to grow in popularity. This purely mechanical
desalination process works independently of any heat sources, unlike
evaporation methods. The investment costs are considerably lower
than those of thermal systems. Standardised system designs minimise
installation times and enable straightforward operation and service. SOURCE: KSB Copyright © 1996 - 2012, VertMarkets, Inc. All rights reserved. To subscribe or visit go to: http://www.wateronline.com |