E-Cat Orders Being Taken After Successful Launch
The first sale of a one megawatt E-Cat plant took place on
October 28th, 2011, after a successful test of the system was performed
by the customer. Andrea Rossi is now accepting additional orders for
E-Cat plants from serious, qualified parties. Are you a forward thinker
that desires to "ride the wave" of technological innovation?
The 1 MW E-Cat during the
successful test by the first customer on Oct. 28, 2011
Photo by Sterling Allan |
By
Hank Mills
Pure Energy Systems News
If you are reading this page, you are probably interested in truly
"bleeding edge" energy production technologies. Since that is the case,
how would you like to be able to purchase a one megawatt cold fusion
plant, that can produce vast amounts of constant heat energy -- using
tiny amounts of nickel and hydrogen as fuel -- and in "self sustained"
manner that consumes almost no electricity as input?
I'm talking about a system that sounds like it is straight out of the
realms of science fiction, and rivals any other energy production method
on the planet. The idea of actually being able to purchase such an
exotic, efficient, and low cost source of energy sounds pretty exciting
doesn't it?
Well, I have some really cool news for you, and the entire world!
If you are qualified customer with the cash, Andrea Rossi is taking
orders for one megawatt
E-Cat plants. I mean one megawatt cold fusion plants that exist,
operate, and are ready for sale in the REAL WORLD, right now. I'm not
talking about a product that might exist in some "pie in the sky"
future. The first two of his one megawatt plants have already been sold
(one delivered and the second is under construction). To read about the
test and sale of the first plant that was sold, you can read our
article, "Rossi's E-Cat Victory on Cold Fusion's Emergence Day."
These truly paradigm shifting plants can be configured to produce up to
one megawatt of output each. They are composed of between 52 and 100 or
more individual E-Cat "modules", that each have three small, internal
cold fusion reactors. All of these modules fit inside a standard steel
container (5m x 2.6m x 2.6m) that can be shipped anywhere in the world
-- by land, sea, or air transport. Importantly, unlike conventional
fission nuclear reactors, cold fusion E-Cats utilize no radioactive
substances, emit no radiation into the environment, produce zero nuclear
waste, and cannot "melt down." In a worst case scenario if a reactor
core grows too hot, it simply goes dead and stops working.
A full test of the plant is made with the potential customer, before any
sale is finalized. During this same time period, training for the
purchaser's engineering and technical staff is provided. If the customer
is not satisfied with the training and results of the test, the
transaction does not take place. It is important to note that the
customer (or his agents) are in complete control of all aspects of the
test, how it is conducted, what measuring equipment is used, how long
the test last, and if the test is conducted in standard (with constant
power) or in self-sustain mode (virtually zero input power).
Simply put, a potential customer has the opportunity to convince him or
herself that the plant works as claimed, within reason, as agreed upon
also by Andrea Rossi.
- If they want to do a "control run" with no hydrogen in the
reactor cores (to compare the results to an actual run with
hydrogen) they can go for it!
- If they want to see the unit in constant self sustain mode for
an extended period of time, they can say so, and it will happen!
- If they want to bring the most expensive, high tech
oscilloscopes and testing equipment to measure every micro-watt of
power consumed during operation, that's fine!
The technology works beyond any doubt, and Andrea Rossi is so
confident in his product that he is willing to let potential customers
perform the test their way, with the equipment they choose, and how they
see fit.
For now, these units can only be sold to qualified customers. This means
a customer who is not simply an interested private individual, but
actually represents a business, company, institution, or agency.
However, he is hoping to have smaller units for domestic use by
individuals, ready in about a year's time. The big issue here is
certification. He has a European certification mark for his industrial
scale plants, but not yet for smaller systems.
The price of one of the one megawatt plants is 2,000 USD per kilowatt
installed. In my opinion, this is a very fair price, when you consider
the massive fuel savings that can be obtained. Unlike a system of
comparable output burning fossil fuels, the fuel for an E-Cat plant is
very cheap, to the point of being considered negligible. For example,
Rossi has stated that the hydrogen and nickel powder needed for a one
megawatt plant to operate for a minimum of six months, would cost no
more than a couple hundred Euros. This is because the few grams of
nickel initially placed in each reactor core lasts a minimum of six
months, and the hydrogen consumption of the entire system is so low. In
fact, during the entire test of the first plant that was sold, less than
two grams of hydrogen kept the entire system running for the entire
duration of the event (seven hours or so). This is a truly miniscule
amount of hydrogen.
Other benefits of an E-Cat plant technology include it's compact size or
"energy density", it's ability to run in a quiet manner (50 decibels or
less measured at five meters away), it's ability to continually produce
a constant output despite weather conditions (unlike solar or wind
power), and the modularity of the device -- if one of the many
individual module failed for some reason, it could be quickly replaced
with another.
Rossi hopes to be capable of producing thirty to one hundred one
megawatt plants during the first year of production. If you are a
qualified and serious customer, you can contact Leonardo Corporation
(Rossi's company), and reserve your spot in line for one of these
plants. By being one of the first customers in the world to purchase a
one megawatt E-Cat plant, you will be showing....
- Your savvy and refined business sense, which led you to purchase
the most attractive energy production method on the planet.
- Your dedication to being on the "bleeding edge" of technological
innovation. Instead of choosing a technology of the past to generate
the energy your organization needs, you chose a true "breakthrough"
technology. You are leading the pack, so to speak.
- Your dedication to environmentally friendly "green"
technologies. By emitting no pollution of any kind, utilizing no
radioactive substances, producing no radioactive waste, and using
only miniscule amounts of fuel, an E-Cat plant is the most
ecologically friendly energy producing device on the entire planet.
- Your dedication to helping move human civilization forward, into
a new scientific era. The introduction of the E-Cat technology will
be a sign that humanity can engineer a solution to any problem we
have. There is no longer anything that is impossible!
I would encourage all serious, qualified parties that are in need of
a source of clean, abundant, safe, and cheap energy to contact Leonardo
Corporation. It's time we all work together to get humanity fully out of
the fossil fuel age, and into the cold fusion age. This transition
started on October 28th, 2011 with the test of the first one megawatt
plant. Are you going to "ride the wave" by helping this transition
continue, or sit by and watch?
For more information, please contact Leonardo Corporation at the
following address: info@leonardocorp1996.com
PESN.com
Copyright © 2002-2012,
PES Network Inc.
http://pesn.com/2011/11/03/9501945_E-Cat_Orders_Being_Taken_After_Successful_Launch/
|